Fujitsu LIFEBOOK U904 - Connecting notebook to Port Replicator (lid open)

Working with the no tebook
Positioning the notebook with the lid open
► Remove the AC plug for the AC adapter from the A C s ocket.
► Disconnect the AC ada pter cable from the DC socket (DC IN) of the notebook.
1
2
2
3
► Open the rel
ease leve r prior to docking (1).
► When the lid is open, the levers on the b ack are not visible. Therefore, position the notebook
so that it is in line with the back edge of the Port Replicator (2) while checking positions of
the levers with your fingers.
► Place the n
otebook onto the Po rt Replicator and ensure that it locks into place correctly.
► Press the cover on the back center (3, hinge side).
42 Fujitsu