Security functions
Password protection for booting of the operating s ystem
With the supervisor HDD password yo u have set in the BIOS Setup Utility
(see section "
Setting supervisor and user HDD password", Page 48), you
can also prevent booting of t he operating system.
Operating system
Activating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatings ystem
► Select the Password on Boot option and press the Enter key.
► Select the desired option (Disabled, First Boot or E very Boot) and press the Ente r key
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. You will be p rompted to enter your password
(the supervisor HDD password).
Deactivating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatings ystem
► Select the Password on Boot option and press the Enter key.
► Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected .
50 Fujitsu
To Next Page
Loading...
