First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure m ust not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do s o!
To make it easier to use yo
ur device for the first time, the operating system
is pre-installed on the
hard disk.
► Switch on your device.
► D uring install
ation, follow the instructions on screen.
If a Windows op
erating system is installed on your device, you will find more
information o
n the system and drivers, help programmes, upda tes, manuals etc. on
the device or o
n the Internet under "
http://www.fujitsu.com/fts/ suppor t/".
You can find in
formation and h elp on the Windows operating system functions
on the Intern
et at "
http://windows .microsoft.com" .
18 Fujitsu
To Next Page
Loading...
