Settings in B IOS Setup Utility
Exiting B IOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
► To save the c urrent menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The notebook is rebooted
and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was ca lled remain effective. BIOS
Setup Utility is te rminated and the notebook is r ebooted.
Load Setup Defaul
ts – Copy Standard Entries
► To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes – Discard changes without exiting
the BIOS Setup Utility
► To discard the changes you have m ad e, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility w as called remain effective.
You can now make additional settings in the BIOS S etup Utility.
► IfyouwanttoexitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Chan
ges - save changes without exiting
the BIOS Setup Utility
► To save the changes, select Save Changes and Yes.
The changes are saved. You can no w make additional settings in the BIOS Setup Utility.
► If you want to exit B IO S Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Chan ges and Power Off
► To save the changes and sw itch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
62 Fujitsu
To Next Page
Loading...
