Fujitsu LIFEBOOK U9311 - Assigning the Supervisor and User Passwords

Security functions
Assigning the supervisor and user passwords
► Start the BIOS Setu p Utility and go to the Security menu.
► Select the Set Supervisor Passw ord field and press the Enter key.

With Enter new Password: you are asked to enter a password.
► Enter the password and press the Enter key.

Confirm new Password requires you to confirm the password.
► Enter the password aga in and press the Enter key.

Changes have been saved is a confirmation that the new password has been saved.
► To set the user password, select Set User Password and procee d exactly as
when configuring the supervisor password.

If you d o not want to change any other settings, you can exit BIOS S etu p Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSupervisorpasswor
d
Userpassword

The notebook is then rebooted and the new password come s into effect. It will now be necessary
to first enter your supervisor or user p assword in order to open the BIOS Setup Utility. Please
note that the user password o nly provides access t o a few of the BIOS settings.
Changing the supervisor or user password
You can only change the supervisor passw ord wh en you have logged into the
BIOS Se tup Utility with the supervisor password.
PasswordSupervisorpasswordUserpassword
► Call the BIOS Setup Utility and g o to the Security menu.
► When changing the password, proceed exa ctly as for password assignm ent.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Setu p Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.

You will be requ ested to enter the current password by the Enter Current Password prompt.
Yo u will be requested to enter a new password by the E nter New Password prom pt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.

The notebook will n ow reboot with the password rem ove d.
Removing the supervisor password simultaneously deactivates the user password.
Fujitsu 49