Fujitsu MHX2300BT - Identify Device Dma (Xee)

5.3 Host Commands
(27) IDENTIFY DEVICE DMA (X’EE’)
At command issuance (Shadow Block Registers setting contents)
When this command is not used to transfer data to the host in DMA mode, this
command functions in the same way as the Identify Device command.
• Error reporting conditions
(1) A SATA communication error occurred (ST = 51h, ER = 0Ch).
CM 1 1 1 0 1 1 1 0
DH x x x x xx
CH
CL
SN
SC
FR
xx
xx
xx
xx
xx
At command completion (Shadow Block Registers contents to be read)
ST Status information
DH x x x x xx
CH
CL
SN
SC
ER
xx
xx
xx
xx
Error information
C141-E254 5-105