EasyManua.ls Logo

Fujitsu MHX2300BT - Features; Functions and Performance; Adaptability

Fujitsu MHX2300BT
296 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Device Overview
1.1 Features
1.1.1 Functions and performance
The following features of the disk drive are described.
(1) Compact
The disk drive has up to 3 disks of 65 mm (2.5 inches) diameter, and its height is
12.5 mm (0.492 inch).
(2) Environmental Protection
The disk drive comply with the RoHS (Restriction of the use of certain Hazardous
Substances in electrical and electronic equipment) directive issued by European
Union (EU).
(3) Large capacity
The disk drive can record up to 100 GB (formatted) on one disk using the RLL
recording method and 30 recording zone technology. The disk drive has a
formatted capacity of 300 GB (MHX2300BT) and 250 GB (MHX2250BT)
respectively.
(4) High-speed Transfer rate
The disk drive (the MHX2xxxBT Series) has an internal data rate up to
60.8 MB/s. The disk drive supports an external data rate 1.5Gbps (150MB/s)
(Serial-ATA Generation-1). And the disk drive realizes a high performance by
high-speed transfer rate combined with Native Command Queuing (NCQ).
(5) Average positioning time
Use of a rotary voice coil motor in the head positioning mechanism greatly
increases the positioning speed. The average positioning time is 12 ms (at read).
1.1.2 Adaptability
(1) Power save mode
The disk drive is ideal for applications since it supports the power save mode
function that works in each of the Idle, Standby, and Sleep modes and has the
Partial and Slumber interface power management functions. And automatically
power down by APM function makes the disk drive ideal for mobile use where
power consumption is a factor.
(2) Wide temperature range
The disk drive can be used over a wide temperature range (5 °C to 60 °C at DE
surface)
1-2 C141-E254

Table of Contents

Related product manuals