Interface
(31) SECURITY ERASE PREPARE (X’F3’)
The SECURITY ERASE UNIT command feature is enabled by issuing the
SECURITY ERASE PREPARE command and then the SECURITY ERASE
UNIT command. The SECURITY ERASE PREPARE command prevents data
from being erased unnecessarily by the SECURITY ERASE UNIT command.
• Error reporting conditions
(1) The device is in Security Frozen mode (ST = 51h, ER = 04h).
(2) A SATA communication error occurred (ST = 51h, ER = 14h).
At command issuance (Shadow Block Registers setting contents)
CM
1 1 1 1 0 0 1 1
DH
x x xx x x
CH
CL
FR
xx
SN
SC
xx
xx
xx
xx
At command completion (Shadow Block Registers contents to be read)
ST Status information
DH x x x x xx
CH
CL
SN
SC
xx
Error information
ER
xx
xx
xx
5-130 C141-E254
To Next Page
Loading...
