Fujitsu MHX2300BT - Error Posting; Table 5.44 Command Code and Parameters

Interface
5.3.3 Error posting
Table 5.44 lists the defined errors that are valid for each command.
Table 5.44 Command code and parameters (1/2)
Error Field Status Field
COMMAND NAME
SFRW SFRR UNC IDNF ABRT TK0NF DRDY DWF ERR
RECALIBRATE V V V V V V
READ SECTOR(S) V V V V V V V
V V V V V
WRITE VERIFY V V V V V V V
READ VERIFY SECTOR(S) V V V V V V V
V V V V V
EXECUTE DEVICE
DIAGNOSTIC
V *1 *1 *1 *1
INITIALIZE DEVICE
PARAMETERS
V V V V V
DOWNLOAD MICROCODE V V V V V
STANDBY IMMEDIATE V V V V V
IDLE (UNLOAD)
IMMEDIATE
V V V V V
STANDBY V V V V V
IDLE V V V V V
CHECK POWER MODE V V V V V
SLEEP V V V V V
SMART V V V V V V V
DEVICE CONFIGURATION V V V V V V
READ MULTIPLE V V V V V V V
WRITE MULTIPLE V V V V V V
SET MULTIPLE MODE V V V V V
READ DMA V V V V V V V
WRITE DMA V V V V V V
READ BUFFER V V V V V
FLUSH CACHE V V V V V V
WRITE BUFFER V V V V V
IDENTIFY DEVICE V V V V V
IDENTIFY DEVICE DMA V V V V V
SET FEATURES V V V V V
SECURITY SET PASSWORD V V V V V
WRITE SECTOR(S) V
SEEK V
5-168 C141-E254