Fujitsu MHX2300BT - Page 243

5.3 Host Commands
Table 5.44 Command code and parameters (2/2)
Error Field Status Field
COMMAND NAME
SFRW SFRR UNC IDNF ABRT TK0NF DRDY DWF ERR
SECURITY UNLOCK V V V V V
SECURITY ERASE PREPARE V V V V V
SECURITY ERASE UNIT V V V V V
SECURITY FREEZE LOCK V V V V V
SECURITY DISABLE
PASSWORD
V V V V V
V V V V
SET MAX V V V V V V
V V V V V V
READ DMA EXT V V V V V V V
V V V V
V V V V V V V
WRITE LOG EXT V V V V V V
WRITE SECTOR(S) EXT V V V V V V
WRITE DMA EXT V V V V V V
SET MAX ADDRESS EXT V V V V V V
WRITE MULTIPLE EXT V V V V V V
READ LOG EXT V V V V V V V
V V V V V V
FLUSH CACHE EXT V V V V V V
WRITE MULTIPLE FUA EXT V V V V V V
WRITE DMA FUA EXT V V V V V V
READ FP DMA QUEUED V V V V V V V
WRITE FP DMA QUEUED V V V V V V
READ NATIVE MAX
ADDRESS
V
READ SECTOR(S) EXT V
READ NATIVE MAX
ADDRESS EXT
V
READ MULTIPLE EXT
READ VERIFY SECTOR(S)
EXT
V
V: Valid on this command
*1: See the command descriptions.
* For a description of each bit in the Error field and Status field,
see Section 5.2.4.
C141-E254 5-169