Fujitsu MHX2300BT - Security Freeze Lock (Xf5)

Interface
(33) SECURITY FREEZE LOCK (X’F5’)
This command puts the device into FROZEN MODE. The following commands
used to change the lock function return the Aborted Command error if the device
is in FROZEN MODE.
• SECURITY SET PASSWORD
• SECURITY UNLOCK
• SECURITY ERASE UNIT
• READ VERIFY SECTORS (EXT)
• DEVICE CONFIGURATION SET
• SECURITY DISABLE PASSWORD
• SECURITY ERASE PREPARE
FROZEN MODE is canceled when the power is turned off.
If this command is reissued in FROZEN MODE, the command is completed and
FROZEN MODE remains unchanged.
The following medium access commands return the Aborted Command error
when the device is in LOCKED MODE:
• READ DMA (EXT)
• READ MULTIPLE (EXT)
• READ SECTORS (EXT)
• WRITE DMA (EXT)
• WRITE MULTIPLE (EXT)
• WRITE SECTORS (EXT)
• WRITE VERIFY
• SECURITY DISABLE PASSWORD
• SECURITY FREEZE LOCK
• SECURITY SET PASSWORD
• SET MAX ADDRESS (EXT)
• FLUSH CACHE (EXT)
• DEVICE CONFIGURATION RESTORE
5-132 C141-E254