Operations
SET ADDRESS MAX (EXT) •
•
•
•
•
•
•
The maximum LBA specified in SET MAX ADDRESS or SET MAX
ADDRESS EXT.
SET FEATURES (Write Cache Enable/Disable)
The write cache enable/disable setting established by the SET FEATURES
command with subcommand code of 02h or 82h.
SET FEATURES (Set Transfer Mode)
PIO, Multiword, and UDMA transfer mode settings established by the SET
FEATURES command with subcommand code of 03h.
SET FEATURES (Advanced Power Management Enable/Disable)
The advanced power anagement enable/disable setting established by the SET
FEATURES command with subcommand code of 05h or 85h. The advanced
power management level established in the Sector Count field when advanced
power management is enabled (SET FEATURES subcommand code 05h)
shall also be preserved.
SET FEATURES (Read Look-Ahead)
The read look-ahead enable/disable setting established by the SET
FEATURES command with subcommand code of 55h or AAh.
SET MULTIPLE MODE
The block size established with the SET MULTIPLE MODE command.
SET FEATURES (Write-Read-Verify feature set)
The Write-Read-Verify enable/disable setting established by the SET
FEATURES command with subcommand code of 0b h/8b h.
6-6 C141-E254
To Next Page
Loading...
