Fujitsu MHX2300BT - Page 286

Index
configuration
DEVICE CONFIGURATION
IDENTIFY data structure............5-88, 5-89
device.............................................. 2-1, 2-2
drive system........................................... 2-3
DEVICE CONFIGURATION
RESTORE............................................5-86
system .................................................... 2-3
connection
DEVICE CONFIGURATION SET.........5-87
drive ....................................................... 2-3
device connector ........................................3-9
connection to SATA interface................... 1-3
device control field ..................................5-28
connection with host system...................... 3-9
device overview .........................................1-1
connector location ..................................... 3-9
device ready (DRDY) bit.........................5-27
connector pinout...................................... 5-10
device seek complete (DSC) bit...............5-27
connector specification
device specification ...................................1-4
host system .......................................... 3-10
device write fault (DF) bit .......................5-27
connector, device....................................... 3-9
device/head field......................................5-26
controller circuit ................................. 2-3, 4-4
device-initiated interface power
management .........................................1-15
current and power dissipation.................... 1-8
current attribute value.............................. 5-62
device-nitiated power management
current fluctuation (Typ.) at +5 V
when power is turned on........................ 1-9
interface................................................1-15
diagnosis ....................................................6-2
current LBA under test ............................ 5-70
diagnostic code ...............................5-24, 5-43
current requirements and power
dissipation.............................................. 1-8
digital PLL circuit....................................4-12
dimension...................................................3-2
current span under test............................. 5-71
DIPM .......................................................1-15
cylinder high field ................................... 5-26
disk......................................................2-2, 4-2
cylinder low field .................................... 5-25
disk drive outerview ..................................2-2
disk enclosure ............................................2-2
D
DMA active - device to host....................5-18
DMA buffer offset field...........................5-28
D/A converter (DAC).............................. 4-14
DMA data-in command protocol...........5-175
data - host to device or device to host
(bidirectional) ...................................... 5-21
DMA data-out command protocol.........5-176
DMA setup - device to host or host to
device (bidirectional) ...........................5-19
data area................................................... 4-15
data assurance in the event of power
failure................................................... 1-11
DMA transfer count field.........................5-28
DOWNLOAD MICROCODE.................5-45
data buffer ................................................. 1-3
DOWNLOAD MICROCODE
operation...............................................5-45
data buffer structure................................. 6-13
data for caching ....................................... 6-14
drive connection.........................................2-3
data format of
drive error logging capability ..................5-64
device attribute value........................... 5-60
drive system configuration ........................2-3
guarantee failure threshold value......... 5-60
driver circuit.............................................4-15
READ LOG EXT log page 10h........ 5-149,
5-150
driving ready LED ...................................5-11
SMART comprehensive error log........ 5-68
E
SMART summary error log................. 5-66
data format version number..................... 5-61
E_status field ...........................................5-28
data request (DRQ) bit ............................ 5-27
effect, blower .............................................2-2
data transfer mode ................................. 5-122
electrical specification ...............................5-7
data-surface servo format ........................ 4-15
enabling and disabling .............................6-21
DE.............................................................. 2-2
environmental protection ...........................1-2
device attribute value, data format of...... 5-60
environmental specification.......................1-9
device configuration...........................2-1, 2-2
error (ERR) bit.........................................5-27
DEVICE CONFIGURATION ................ 5-85
error correction and retry by ECC .............1-3
DEVICE CONFIGURATION
FREEZE LOCK................................... 5-86
error data structure...................................5-67
error field .................................................5-24
DEVICE CONFIGURATION
IDENTIFY........................................... 5-87
error logging capability............................5-64
error posting...........................................5-168
IN-2 C141-E254