Getting started
Removing monitor base
Before you can use a swivel arm or a wall bracket, you must remove the monitor base.
The display surfa ce is susceptible to scratching!
1
► Switch off the monitor and pull the power
plug out of the power socket.
► Lay the monitor on its face on a soft surface.
► Remove the cover and disconnect all cables.
► Remove the screws (1) on the rear
of the monitor.
You can now mount a swivel arm or
a wall bracket as per VESA FPMPMI
with 100 mm hole spacing.
For instructions on how to mou nt the swivel arm or wall bracket, please see
the documentation for the s wive l arm or wall bracket.
12 A26361-K1319-Z220-1-7619, edition 2
To Next Page
Loading...
