Getting started
Adjusting the height
The height of the monitor can be adjusted by approximately 120 mm.
► Grasp the monitor with bo th hands on the right and left edge of th e casing
and move it u pward or downward.
Adjusting the inclination
The inclination of the monitor
can be adjusted by –4° (forwards) and +34 °
(backwards) from its vertical
position.
► Hold the monitor with both hand
s on the left and right sides of the casing
and move it to the desired angle
.
Adjusting t he rotation
The monitor can be rotated by ± 90° from its centre position.
► Grasp the monitor with bo th hands on the right and left edge of th e casing
and turn it to the desired position.
Adjusting portrait format
The monitor can be ro tated from horizontal format (landsca pe mo de) into
vertical format (portrait mode).
► Grasp the mo nitor with both hands on the r ight and left edge of the casing, move it into
the highest position and turn it clockwise until it is in the portrait position.
► To set the screen back into landsca pe mode, rotate it back anti-clockw ise.
The screen supports the "Auto pivot" function with the associated software
(DisplayView Click, Pivot), which is used to adapt the screen display to
the orientation of the screen. This software is included in the delivery
(CD-ROM) and must be installed on your computer.
A26361-K1319-Z220-1-761 9, edition 2 13
To Next Page
Loading...
