Operation
Front Rear
12
3
1 = power indicator 3 = green standby mode switch
2 = ON/OFF switch
In switch position "0" (ECO
), green standby m ode is activated, in which the mon itor
consum es ≤ 0.1W.Ifthemon
itor cannot be switched on and remains dark, the switch
must be set to "-" (BASIC).
The monitor t hen consumes < 1 W in standby mode.
► Switch the device on using
the ON/OF F switch.
Only switch on the comput
er after you have switched on the mon itor.
Notes o n power management
If your computer is equi
pped with power management (powe r-savin g mode), the m onitor can fully
support this function.
Here the mon itor does not distinguish between the individual energy-saving
modes of the computer (
standby mode, suspe nd mode a nd OFF m ode), as it is capable of
immediately switchin
g into the m ode with the highest energy-saving effect.
Stage Operation
Power saving mode
Normal
ECO Green Standby
Mode
Compatible
Power supply
indicator
Lights up blue Lights up green unlit Lights up orange
Monitor Max. brightness
typ. 200 cd/m
2
Unlit Unlit
Power consumption
(typical)
<28W <19W reduced to
≤ 0.1 W
reduced to
<1W
If your computer detects inactivity (no input), it sends an appropriate signal to the m onitor to redu ce
the pow er consumption (energy-saving mode). The power indicat or of the m onitor changes colour to
indicate the status change. ECO and G ree n Standby Mo de are the preset factory defaults.
Once an input is m ad e at the computer the screen contents are restored.
For detailed information on how energy -saving mode operates, please refer to
the opera ting manual or technical manual of the comput er.
A26361-K1319-Z220-1-761 9, edition 2 17
To Next Page
Loading...
