42 Operating Manual BX920 S2
Control and display elements
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-5781-001.fm
Hard disk drive indicators
Figure 7: Indicators on the 2.5-inch HDD module
Status indicators for the I/O fabrics* (green)
– Lights up to indicate a network connection.
– Flashes to indicate an active network connection.
– Does not light up if there is no network connection.
* The three I/O fabrics of the server blade are:
Fabric 1: onboard LAN controller
Fabric 2: mezzanine card 1
Fabric 3/4: mezzanine card 2
1 HDD BUSY (green)
– Lights up: HDD in active phase
– Does not light: HDD inactive (drive inactive)
0
/
To Next Page
Loading...
