Fujitsu PRIMERGY BX920 S2 - Cpu Status; Memory Status

74 Operating Manual BX920 S2
Server menu
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-5782-001.fm
6.8.1 CPU STATUS
CPU 1 Status / CPU 2 Status
Specifies the status of the installed CPUs. The status of an unpopulated
CPU socket cannot be changed.
Enabled
The service processor stops the CPU upon request.
Disabled
The function is not activated.
Failed
The service processor stops the CPU due to an error.
6.8.2 Memory Status
CPU 1: DIMM x,y / CPU 2: DIMM x,y
Specifies the current status of the memory banks/memory modules:
Enabled
If the memory bank is populated, the system memory module is
used.
Disabled
The memory module is not used by the system.
Failed
If an error occurs in a memory module and it cannot be corrected
or if the system makes a memory correction too often, the status
of the corresponding memory bank/memory module is
automatically set to Failed.