EasyManua.ls Logo

Fujitsu PRIMERGY BX920 S2 - Page 77

Fujitsu PRIMERGY BX920 S2
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BX920 S2 Operating Manual 73
Server menu
I This item is only displayed if "O/S Boot Timeout" is set to
Enabled.
Timeout Value
Sets the boot watchdog timer of the operating system in minutes
(0 ... 100).
I This item is only displayed if "O/S Boot Timeout" is set to
Enabled.
ASR&R Boot Delay
Specifies the ASR&R boot delay time in minutes (1 ... 2 ... 30).
Power Cycle Delay
Specifies the delay between Power Off and the following Power On in
seconds (0 ... 7 ... 15).
Temperature Monitoring
Specifies whether the system can still be started when reaching a critical
temperature (Enabled) or not (Disabled).
Boot Retry Counter
Specifies the number of boot attempts (0 ... 3 ... 7) after a failed boot
process.
CPU STATUS
Calls a submenu for specifying the CPU status (see page 74).
Memory Status
Calls a submenu for specifying the memory status (see page 74).
PCI Status
Calls a submenu for specifying the PCI status (see page 75).
Console Redirection
Calls a submenu for specifying additional settings for the console (see
page 75).
IPMI
Calls a submenu for specifying the IPMI configuration and the Event Log
(see page 76).

Table of Contents

Other manuals for Fujitsu PRIMERGY BX920 S2

Related product manuals