60 Operating Manual BX920 S2
Advanced menu
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-5782-001.fm
Advanced System Configuration
Calls a submenu for configuring the PCI slots and PCI components on
the motherboard (see page 64).
Advanced Memory Options
Calls a submenu for specifying the memory properties (see page 64).
Advanced Processor Options
Calls a submenu for specifying the CPU properties (see page 65).
6.5.1 Peripheral Configuration
The "Peripheral Configuration" submenu contains the following items:
Serial
Use this input field to activate (Enabled) or deactivate (Disabled) the serial
connector.
Serial Port 1 Address
Specifies the base I/O address and the interrupt for the serial
(3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4, 2E8h/IRQ3).
USB Host Controller
This item allows the following USB settings:
USB Speed
Specifies the speed at which the USB ports are operated.
USB 1.1
The USB 2.0 high speed host controller is deactivated.
USB 1.1 & USB 2.0
Both host controllers are activated.
USB Devices
Specifies which USB devices (None, Keyboard And Mouse Only, All)
are to be available after the boot process.
USB Front
determines if the USB interfaces at the front may be used
(Enabled) or not (Disabled).
To Next Page
Loading...
