Fujitsu PRIMERGY BX920 S2 User Manual

48 Operating Manual BX920 S2
Cleaning the Server Blade
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-5781-001.fm
5.4 Cleaning the Server Blade
V CAUTION!
Switch off the server blade and remove it from the system unit (see
page 34).
Do not clean any interior parts of the server blade yourself; leave this job
to a service technician.
Do not use abrasive powder or detergents which dissolve plastic to clean
the housing exterior.
Make sure that no liquid gets inside the device and that the ventilation
slits on the ServerBlade remain open.
Wipe the server blade housing with a dry cloth to clean. If it is very dirty you can
use a damp cloth that has been dipped in water with a mild detergent and well
wrung out.

Fujitsu PRIMERGY BX920 S2 Specifications

General

Form Factor	Blade
Number of Processors	Up to 2
Processor	Intel Xeon E5600 series
Memory	Up to 96 GB DDR3
Storage	Up to 2 x 2.5" SAS/SATA drives
RAID Support	RAID 0, 1
Network	Up to 4 x 1 Gbit/s or 10 Gbit/s Ethernet
Chassis	PRIMERGY BX900 S2
Operating System Support	Windows Server, Linux, VMware