BX920 S2 Operating Manual 49
6 BIOS Setup
You can set the system functions and the hardware configuration of a server
blade in the BIOS Setup.
I The range of BIOS parameters displayed can vary according to the
configuration.
The default settings are effective when the server blade is delivered. You can
change these settings in the BIOS Setup. The changes take effect as soon as
you save them and exit the BIOS Setup.
The following overviews illustrate how the BIOS Setup menus are structured.
The numbers in brackets refer to the pages that contain the relevant
descriptions.
SysInfo – System Overview
System Information, Page 1 [ 55]
System Information, Page 2 [ 56]
Main – System Overview
System Time / System Date [ 57]
Sync RTC with Mgmt. Blade [ 57]
Boot Features [ 58]
POST Errors [ 58]
NumLock [ 58]
Fast Boot [ 58]
POST Diagnostic Screen [ 58]
Boot Menu [ 58]
System Memory / Extended Memory [ 58]
Advanced – Advanced Settings
Reset Configuration Data [ 59]
Peripheral Configuration [ 59]
Serial [ 60]
Serial Port 1 Address [ 60]
USB Host Controller [ 60]
USB Speed [ 60]
To Next Page
Loading...
