52 Operating Manual BX920 S2
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-5782-001.fm
The following sections describe the individual menus and their settings as well
as how to access and operate the BIOS Setup. Default values are displayed in
bold.
Server – Server Configuration (continued)
Protocol [ 75]
Flow Control [ 76]
Continue C.R. after POST [ 76]
IPMI [ 73]
SM Error Halt [ 76]
Load iRMC Default Values [ 76]
Event Log Full Mode [ 77]
SDRR Version [ 77]
LAN Settings [ 77]
Service LAN [ 77]
Service LAN Port [ 77]
DHCP [ 77]
Local IP Address [ 78]
Subnet Mask [ 78]
Gateway Address [ 78]
IPMI Status [ 77]
IPMI Specification Version [ 78]
iRMC Hardware [ 78]
Server – Server Configuration (continued)
iRMC Firmware Version [ 78]
Boot – Boot Priority Order
1st Boot Device / 2nd Boot Device / 3rd Boot Device / 4th Boot Device / 5th Boot
Device [ 79]
Exit – Exit Options
Save Changes and Exit [ 80]
Discard Changes and Exit [ 80]
Get Default Values [ 80]
Load Previous Values [ 80]
To Next Page
Loading...
