RX4770 M4 Operating Manual 59
Starting up and operation
iRMC-related status signals
I For further information, please refer to chapter "Updating or recovering
the iRMC" in the Upgrade and Maintenance Manual.
6
AC
connected
indicator
green on
– The server is switched off and
connected to the mains
(standby mode).
– The server has been switched
on but Power Cycle Delay
settings delay it from turning
on for a specified time.
I After connecting the server
to the mains, it will take
about 60 seconds until the
server will enter standby
mode and can be switched
on.
off
– The server is switched off and
not connected to the mains.
– The server is switched on and
operating normally.
ID indicator
Global error
indicator
Description
blue flashing off
A remote connection has been
established. Local VGA output has
been disabled during the remote
session.
blue flashing orange flashing
An emergency flash of the iRMC
firmware is in progress.
Pos. Label Indicator Status Description
To Next Page
Loading...
