EasyManua.ls Logo

Fujitsu PRIMERGY TX100 S2 - 6 Accessible Drives; Preparation

Fujitsu PRIMERGY TX100 S2
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX100 S2 Options Guide 33
6 Accessible drives
V CAUTION!
Follow the safety instructions in the chapter "Safety instructions" on
page 15.
Two 5.25-inch bays are available for accessible drives. DVD drives or magnetic
tape drives can be installed in these slots.
By default, the upper slot is fitted with a DVD drive.
6.1 Preparation
Ê Open the server (see section "Opening the server" on page 23).
Ê Remove the dummy module.
Removing the dummy module
Figure 10: Removing the screws of the dummy module
Ê Unscrew the two screws.

Other manuals for Fujitsu PRIMERGY TX100 S2

Related product manuals