TX100 S2 Options Guide 47
Expansion cards and parallel interface
8.2 Installing a parallel interface cable
I This feature is not available for the Japanese market.
Ê Open the server (see section "Opening the server" on page 23).
Ê Remove the screw from the slot cover for slot 1.
Ê Remove the slot cover.
V CAUTION!
Keep the slot cover in a safe place. If you remove the parallel interface
again and do not replace it with a new one, then reinstall the slot cover
to comply with EMC regulations and to satisfy cooling requirements and
fire protection measures.
Figure 24: Extension of the slot cover
Ê Attach an extension bracket with one screw to the slot cover of the parallel
interface cable.
To Next Page
Loading...
