To Next Page

To Previous Page

Note: It is necessary to set the report setting beforehand.

For direction of Performance Manager, please refer to "ServerView User's Guide".

If the ServerView Remote Connector is not a normal run, please reboot the service with following

process. (There is no necessity to reboot the system.)

[Control Panel] - [Administrative Tools] - [Services] - [ServerView Remote Connector]

Do <Restart> the service

2． Updates for "PRIMERGY TX150 S6 User's Guide"

Chapter 4 "4.3 Storing the System Configuration Information"

4.3.1 Storing the BIOS Information and the Remote Management Controller Information (Page 82)

Deletion Please delete following notes.

 Do not input the file extension at the end of a file name.

 The file name is given as "cmosfile" when a file name is not input.

4.3.2Recovering the BIOS / Remote Management Information (Page 83 - 84)

Correction There is a misspelling on the command line.

4 Enter the following command and press the [Enter] key.

False: A:¥SMT>BIOSRESET.bat

True: A:¥SMT>BIOSREST.bat

Deletion Please delete following notes.

 Do not input the file extension at the end of a file name.

 The file name is given as "cmosfile" when a file name is not input.

4.3.2 Recovering the BIOS / Remote Management Information (Page 83)

Deletion Please delete following misdescription.

Server Management Tools disk is required to be created when mentioned as empty "blank" on the label of the "Server

Management Tools" disk, supplied with the server. Create Server Management Tools by referring to "4.4 Creating

Maintenance Tools and Driver Disks" (pg.85).

2／8

Fujitsu PRIMERGY TX150 S6 Notes On Using

Other manuals for Fujitsu PRIMERGY TX150 S6