System configurator and order-information guide
PRIMERGY TX150 S8 Status 2016-02-29
Configuration diagram PRIMERGY TX150 S8 SFF (2.5") System Unit
red. Fan / PSU Kit 3 x 5.25" bays available
standard
3 x HH 5.25" free or
or
Power
2 x HH 5.25" free + Option A or
Supply
1 x HH 5.25" free + Option D or
(red. + hot plug)
0 x HH 5.25" free + Option A + Option D
Processor ( II ) 1.6 * 5.25" 1.6 * 5.25"
1x Xeon 4C, 6C or 8C or Pentium
Mounting Kit DVD(sl) + LSD: (Option A)
Memory ( III ) - support for SL (0.5") DVD Drive + LSD
the CPU offers 2 Banks ( I and II ) with 3 Channels each
- occupies one 5.25" bay
optional SFF SAS/SATA HDD extension Box: (Option D)
- support for 8x 2.5" (SFF) SAS/SATA HDD hot plug
- occupies two 5.25" bays
Communication/Network ( IX )
Miscellaneous ( X ) Hard disk drives ( VI )
Possibility to install PCIe x8 cards; 2nd pref. RAID Slot
Slot 4 PCIe-3 x16, 280 mm
Possibility to install PCIe x8 cards
Slot 2 PCIe-2 x4, 235 mm @ PCH
Possibility to install PCIe x8 cards; 1st pref. RAID Slot
Slot 1 (5V): PCI 32-Bit/33MHz, 280mm @ PCH
Key:
3x 120 mm Fans (no redundancy)
Fujitsu PRIMERGY Server 4 of 24