EasyManuals Logo

Fujitsu PRIMERGY TX2550 M5 User Manual

Fujitsu PRIMERGY TX2550 M5
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
46 Operating Manual TX2550 M5
Important information
The warranty is void if the server is damaged during installation or
replacement of server expansions.
Only set screen resolutions and refresh rates that are specified in the
operating manual for the monitor. Otherwise, you may damage your monitor.
If you are in any doubt, contact your sales outlet or customer service center.
Only valid for non hot-plug components
Before installing/removing internal components to/from the server, turn off
the server, all peripheral devices, and any other connected devices. Also
unplug all power cords from the power outlet. Failure to do so can cause
electric shock or damage.
Internal devices remain hot after shutdown. Wait for a while after shutdown
before installing or removing internal options.
Do not damage or modify internal cables or internal devices. Doing so may
cause a server failure, fire, or electric shock and will void the warranty and
exempt the manufacturer from all liability.
The circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. To ensure reliable protection, you must
wear an earthing band on your wrist when working with this type of module
and connect it to an unpainted, conducting metal part of the server.
Do not touch the circuitry on boards or soldered parts. Hold the metallic
areas or the edges of the circuit boards.
Install the screw removed during installation/detaching internal options in
former position. To use a screw of the different kind can cause a breakdown
of equipment.
The procedure of installation on this notes might change depending on a
configuration of option.
Batteries
Incorrect replacement of batteries may lead to a risk of explosion. The
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer.
Do not throw batteries into the trash can.
Batteries must be disposed of in accordance with local regulations
concerning special waste.
Ensure that you insert the battery the right way round.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2550 M5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX2550 M5 and is the answer not in the manual?

Fujitsu PRIMERGY TX2550 M5 Specifications

General IconGeneral
Tcase78 °C
Scalability2S
Processor cache13.75 MB
Processor cores10
Processor model4210
System bus rate- GT/s
Processor socketLGA 3647 (Socket P)
Processor threads20
Processor codenameCascade Lake
Execute Disable BitYes
Processor frequency2.2 GHz
Processor lithography14 nm
Processor manufacturerIntel
Processor package size76.0 x 56.5 mm
Processor boost frequency3.2 GHz
Processor operating modes64-bit
Supported instruction setsAVX-512
Thermal Design Power (TDP)85 W
Number of processors installed1
Maximum number of PCI Express lanes48
Memory types supported by processorDDR4-SDRAM
Memory clock speeds supported by processor2400 MHz
Maximum internal memory supported by processor1024 GB
Memory slots12
Internal memory16 GB
Memory clock speed2933 MHz
Maximum internal memory1500 GB
HDD size2.5 \
RAID levels0, 1, 5, 6, 10, 50, 60
HDD interfaceSerial ATA, Serial Attached SCSI (SAS)
Optical drive typeNo
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs supported8
Chassis typeTower
Product colorBlack, Red
Operating system installed-
Compatible operating systemsMicrosoft Hyper-V Server 2016 Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2016 Standard Microsoft Windows Server 2016 Essentials Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 R2 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Storage Server 2012 R2 Standard VMware vSphere 6.5 VMware vSphere 6.0 SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Red Hat Enterprise Linux
Power supply800 W
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 85 %
CertificationCB, RoHS, WEEE, GS, CE, CSAc/us, FCC Class A, VCCI, KN32, KN35, CCC, C-Tick
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity6
PCI Express slots version3.0
On-board graphics card modelNot available
Processor ARK ID193384
Weight and Dimensions IconWeight and Dimensions
Depth177 mm
Width448 mm
Height736 mm

Related product manuals