22 A26361-K881-Z102-4-7619
Environment Protection Important Notes
3.6 Environment Protection
Environmentally-friendly product design and development
This product has been designed in accordance with the Fujitsu Siemens
Computers standard for “environmentally friendly product design and devel-
opment”. This means that key factors such as durability, selection and labeling
of materials, emissions, packaging, ease of disassembly and recycling have
been taken into account.
This saves resources and thus reduces the harm done to the environment.
Notes on saving energy
Devices that do not have to be switched on permanently should be switched off
until they are needed as well as during long breaks and after completion of work.
Notes on packaging
Please do not throw away the packaging. You may need it later for transporting
your system unit. If possible, the device should only be transported in its original
packaging.
Notes on dealing with consumables
Please dispose of printer consumables and batteries in accordance with local
government regulations.
Do not throw batteries or rechargeable batteries into the trash can. They must
be disposed of in accordance with local regulations concerning special waste.
Note on labeling plastic parts
Please avoid sticking your own labels on plastic parts wherever possible, since
this makes it difficult to recycle them.
To Next Page
Loading...
