A26361-K881-Z102-4-7619 67
Preparation for Use and Operation Configuring the Server
5.5.2 Configuration without ServerStart
Configuring HostRAID
The server is equipped with an onboard
Ultra320
SCSI controller with HostRAID
functionality.
I To configure HostRAID the controller has its own RAID-Select Utility. For
further information see “Adaptec HostRAID User’s Guide“ on the Server-
Books CD (choose Controllers from the menu).
Configuring the PCI RAID controller
If your server is fitted with a RAID controller, you must configure it as described
in the related documentation.
Configuring the onboard SCSI controller
You will find a description of the onboard SCSI controller configuration in the
Technical Manual for the system board (see “Related Publications” on
page 107). Further information is available on the driver diskettes provided.
Installing the operating system
Ê Insert the installation floppy disk and the CD for the operating system you
want to install.
Ê Reboot the server.
Ê Follow the instructions on the screen and in the manual for the operating
system.
If your server is equipped with a RAID controller, please read how to install the
desired operating system in the related manual.
To Next Page