A26361-K881-Z102-4-7619 59
Preparation for Use and Operation Operating and Indicator Elements
Hard disk drive indicators
Figure 26: HDD module: indicators
LED
green
HDD BUSY
– lights: HDD in active phase
– does not light: HDD inactive
LED
orange
HDD FAULT (in conjunction with a RAID controller)
– does not light: No HDD Error
– lights: HDD Faulty or Rebuild Stopped (drive defective/needs
replacing, a rebuild process was stopped or the HDD module is not
correctly inserted)
– slow blink: HDD Rebuild (the data is restored by the RAID controller
after changing a hard disk drive)
– fast blink: HDD Identify
– four fast blinks/pause: HDD Predicted Fault
– two fast blinks/pause: HDD Hot Spare (Hot spare drive active. The
corresponding drive has failed).
To Next Page
Loading...
