Fujitsu ScanSnap S1300i - Page 110

Using ScanSnap with the Quick Menu (for Windows Users)
110
Procedures
1. Load a document in the ScanSnap.
For details, refer to "How to Load Documents" (page 50).
2. Press the [Scan] button on the ScanSnap to start a scan.
 The Quick Menu appears when the scanning is completed.
3. Click the [Scan to Folder] icon .
 The [Scan to Folder] dialog box appears.
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap setup
dialog box.
For details about how to perform scanning by using the Quick Menu, refer to "Basic Scanning Operation
Flow" (page 92).