Profile (for Windows Users)
182
How to Configure Scan Settings
You can configure scan settings depending on your intended use of the scanned images.
The scan settings can be configured in the ScanSnap setup dialog box.
For details about how to configure scan settings, refer to "How to Configure Scan Settings"
(page 237).
Profile Management
For details about how to add, change or delete profiles, refer to the following:
To add a profile (→ page 182)
To change scan settings for profiles (→ page 186)
To rename a profile (→ page 188)
To delete a profile (→ page 190)
Adding Profiles
1. Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to "Right-Click Menu (Windows)" (page
36).
The ScanSnap setup dialog box appears.
HINT
Clear the [Use Quick Menu] check box if it is selected.
To Next Page
Loading...
