Turning the ScanSnap ON/OFF
46
Exiting ScanSnap Manager
You can exit ScanSnap Manager according to the following procedures. Normally, you do
not have to exit ScanSnap Manager.
1. Select [Exit] from the Right-Click Menu.
For details about the Right-Click Menu, refer to "Right-Click Menu (Windows)" (page
36).
1. Select [Quit] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu
(Mac OS)" (page 38).
Sleep Mode
When the ScanSnap has not been used for 1 minutes while the power is on, it enters sleep
(power saving) mode.
The ScanSnap’s internal light switches off in sleep mode.
HINT
Start ScanSnap Manager again in the following procedure.
Select [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap Manager] (for Windows 8.1/
Windows 8, select [ScanSnap Manager] under [ScanSnap Manager] on the all Apps screen).
From the sidebar in Finder, select [Applications] → [ScanSnap], and then double-click [ScanSnap
Manager].
To Next Page
Loading...
