Fujitsu ScanSnap S1300i - Scanning Documents of Different Widths or Lengths in One Batch

Creating Scanned Images Depending on Intended Use (for Windows Users)
214
Scanning Documents of Different Widths or
Lengths in One Batch
You can scan documents of different widths or lengths in one batch.
To scan documents of different widths or lengths in one batch, change the settings in the
following procedure.
1. Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to "Right-Click Menu (Windows)" (page
36).
 The ScanSnap setup dialog box appears.
2. In the [Paper] tab, select [Automatic detection] in [Paper size].