Configuring ScanSnap Manager (for Windows Users)
249
ScanSnap's Communication Status
If you turn the ScanSnap ON/OFF when ScanSnap Manager is running, the pop-up balloon
notifies you of the communication status of the ScanSnap.
When the ScanSnap is ON
(Power cable connection)
(USB bus power cable connection)
When the ScanSnap is OFF
When the ScanSnap will be automatically turned off soon
When the time until auto power-off is specified, the notification appears in the notification
dialog box 5 minutes before the ScanSnap turns off.
HINT
To disable notifications of the ScanSnap's communication status, click the pop-up balloon, and in the
[Status Display] tab of the [ScanSnap Manager - Preferences] dialog box, clear the [Notify of the
communication status] check box.
To Next Page
Loading...
