Fujitsu ScanSnap S1300i - Saving Data in a Specified Folder

Using ScanSnap with the Quick Menu (for Windows Users)
109
Saving Data in a Specified Folder
This section explains how to save the scanned image file in a specified folder.
You can save the scanned image file in a shared folder on the network and share it with
others. In addition, you can inform others of the destination folder path by an e-mail
message automatically created with the path stated.
HINT
 The default e-mail program is used as the e-mail program to link with.
The e-mail program may not properly link with ScanSnap Manager even if it is the default e-mail
program. In this case, contact the manufacturer of the e-mail software.
For configuring e-mail program settings, refer to "E-mail Program Settings" (page 113).
 By registering the scan and save settings as a profile, you can scan documents with the same profile
at any time. For details, refer to "Profile" (page 181).