Fujitsu ScanSnap S1300i - Changing Automatic Linkage Mode

Configuring ScanSnap Manager (for Windows Users)
248
Changing Automatic Linkage Mode
Change automatic linkage mode options in the following procedure.
1. Select [Help] → [Preferences] from the Right-Click Menu.
For details about the Right-Click Menu, refer to "Right-Click Menu (Windows)" (page
36).
 The [ScanSnap Manager - Preferences] dialog box appears.
2. Select the automatic linkage mode in the [Automatic Linkage] tab.
3. Click the [OK] button to close the [ScanSnap Manager - Preferences]
dialog box.
 The setting is changed to the selected automatic linkage mode.
HINT
To disable automatic linkage, select [Do not link automatically] in the [Automatic Linkage] tab of the
[ScanSnap Manager - Preferences] dialog box.