Fujitsu ScanSnap S1300i - Scanning Documents of Different Widths or Lengths in One Batch

Creating Scanned Images Depending on Intended Use (for Mac OS Users)
361
Scanning Documents of Different Widths or
Lengths in One Batch
You can scan documents of different widths or lengths in one batch.
To scan documents of different widths or lengths in one batch, change the settings in the
following procedure.
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu
(Mac OS)" (page 38).
 The ScanSnap setup window appears.
2. In the [Paper] tab, select [Automatic detection] in [Paper size].