Fujitsu ScanSnap S1300i - Replacing the Pad Assy

Replacing the Pad Assy
407
Replacing the Pad Assy
Replace the pad assy in the following procedure.
1. Unplug the cables from the ScanSnap.
2. Remove all documents from the ADF paper chute (cover).
3. Pull the ADF release tab to open the ADF top section.
4. Remove the pad assy.
Squeeze both ends of the pad assy and pull it out in the direction of the arrow.
ADF release tab
ADF top section
ADF paper chute (cover)
Pad assy
ADF top section