Fujitsu ScanSnap S1300i - Page 125

Using ScanSnap with the Quick Menu (for Windows Users)
125
Procedures
1. Load a document in the ScanSnap.
For details, refer to "How to Load Documents" (page 50).
2. Press the [Scan] button on the ScanSnap to start a scan.
 The Quick Menu appears when the scanning is completed.
To change the settings for [Scan to Rack2-Filer Smart], move the mouse cursor to the
[Scan to Rack2-Filer Smart] icon , and then click . For details about how to
change the settings, "Preferences" (page 127).
ATTENTION
When you perform a scan with [JPEG(*.jpg)] selected for [File format] in the [File option] tab of the
ScanSnap setup dialog box, you cannot save the image in Rack2-Filer Smart.
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap setup
dialog box.
For details about how to perform scanning by using the Quick Menu, refer to "Basic Scanning Operation
Flow" (page 92).
ATTENTION
 You cannot start scanning when the Quick Menu is displayed. Save the scanned image to
Rack2-Filer Smart before scanning another document.
 Do not move, delete or rename the scanned image in other applications when the Quick Menu is
displayed.