Fujitsu ScanSnap S1300i - Page 255

Basic Scanning Operation Flow (for Mac OS Users)
255
2. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu
(Mac OS)" (page 38).
 The ScanSnap setup window appears.
3. Select the [Use Quick Menu] checkbox.
4. Click one of the profile buttons.
5. Click the [Apply] button in the ScanSnap setup window.
6. Click the [ ] button in the upper left corner to close the ScanSnap
setup window.
HINT
 The [Recommended] button is selected in default.
 For details about the default settings when using the Quick Menu, refer to the ScanSnap
Manager Help.
Profile Buttons