Fujitsu ScanSnap S1300i - Page 273

Using ScanSnap with the Quick Menu (for Mac OS Users)
273
Procedures
1. Load a document in the ScanSnap.
For details, refer to "How to Load Documents" (page 50).
2. Press the [Scan] button on the ScanSnap to start a scan.
 The Quick Menu appears when the scanning is completed.
To change the settings for [Scan to Print], move the mouse cursor to the [Scan to Print]
icon , and then click . For details about how to change the settings,
"Preferences" (page 275).
3. Click the [Scan to Print] icon .
 The [Print] window appears.
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] checkbox in the ScanSnap setup
window.
For details about how to perform scanning by using the Quick Menu, refer to "Basic Scanning Operation
Flow" (page 254).