How to Load Documents
52
7. Adjust the side guides to the width of the documents.
Moving the side guides, do not leave space between the side guides and the
documents.
Otherwise, the documents may be fed skewed.
ATTENTION
Right-click the ScanSnap Manager icon or in the notification area located at the far right of
the task bar and select [Scan Button Settings]. Then, select the [Scanning] tab → the [Option] button
to show the [Scanning mode option] dialog box. If the [Place document face up] check box is
selected in the [Scanning mode option] dialog box, load documents face-up and bottom edge first.
To Next Page
Loading...
