Operation
Operation
Switching the device on and off
The main switch (3) at the rear and the ON/O FF sw itch (1) at the front are
used for switching the monitor on and off.
Press the buttons from the bottom up.
The colour of the LED indicator ch anges as follows:
LED indicato r Status
blue Monitor a nd computer are switched on.
orange
Monitor is not receiving a video signal or is in power saving mode.
does not light up
Monitor is switched off.
321
1 = ON/OFF switch
2 = Powe r indicator
3 = Main switch
► First switch the device off at the main switch (3).
18 A26361-K1240-Z120-7619, edition 1
To Next Page
Loading...
