Operation
Adjusting the functions in the Advanced menu
Calling up the Advance d window
Input select
Selecting the input signal
This function allows you to switch th e monitor from analog to digital mode
and vice versa w hen two signal sou rces are conne cted,
provided the grap h ics card supports this function.
DDC-CI
Activate/deactivate the D DC-CI function
On = DDC-CI function is activated (default setting)
Off = D DC-CI function is deactivated
ResolutionNotifier
Displaying screen information
The optimum resolution for this monitor is 1280 x 1024 pixe ls. With the
function activa ted (On), a m essa ge appears on the screen after approx. 30
seconds i f a different re solution is set.
Change the resolution t o 1280 x 1024 to achieve optimum picture quality.
With the function deactivated (Off), no me ssage appears.
Factory Recall
Activates the fac tory settings
This function is used to reset all settings to the factory settings. T he user is
not prompted to con firm the changes.
Press the
SELECT/MENU
button to execute this function. The message
Auto Processing is displayed.
Displaying information
Call the Information setting window
With this function the model designation, serial numbe r, resolution, H/V
frequency, input signal and polarity of the synchronisation s ignal are
displayed.
26 A26361-K1240-Z120-7619, edition 1
To Next Page
Loading...
Need help?
General