Fujitsu SE700

Systems on Server Units Working in VM2000 mode
U41855-J-Z125-3-76 121
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.47 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k05
5.5.3 Setting VM options
You manage the VM resources of the various BS2000 VMs using the VM options tab. You
can change VM-specific options, and you can also change the settings for the automatic
IPL for the monitor VM (only SU x86) and persistent BS2000 VMs. For a non-persistent
BS2000 VM (except the monitor VM), you can set the persistence attribute.
On an SU x86 you can also set the remaining runtime for the shutdown.
Ê In the tree structure select
Systems → [<se server>(SE<model>) →] <unit> (SU</390>) → Virtual machines, VM
options tab
or
Systems → [<se server>(SE<model>) →] <unit> (SU<x86>) → Virtual machines → BS2000,
VM options tab
The VM options tab displays the settings of the VMs in the VM-specific options group. For an
SU x86 (see figure) the General options group with the remaining runtime for the shutdown
is displayed beforehand.
The following functions are available:
Setting the VM-specific options (persistence, Auto IPL and startup parameters)
Ê In the VM-specific options group click the Change icon by the required VM and make the
requisite changes in the Change VM-specific options dialog box.
i If you deactivate automatic IPL of a persistent VM, the preset IPL parameters
are retained and are available for an explicit IPL in the "Initiate BS2000 IPL"
dialog box.