Working with the SE Manager Operating the SE Manager
88 U41855-J-Z125-3-76
3.4 Working with the SE Manager
3.4.1 Calling an object or function in the SE Manager
Proceed as follows to call a function area in the SE Manager:
Ê Select an object or function in the primary navigation by clicking it.
A tab opens in the working area which enables you to manage or operate the object or
function Some functions are distributed over more than one tab, and these are
displayed at the top of the working area.
In the working area the content which belongs to the function area of the first tab is
displayed in one or more tables. Buttons or icons may also be available to execute
actions.
Ê If required, select another tab by clicking it.
Alternatively, you can also switch directly between the associated tabs in the tree
structure using an object's or function's tool tip.
The content of the working area changes if you select another tab.
The selected menu item and the selected tab are highlighted by being displayed in bold
black print against a blue or gray background.
Example
Hardware → Units[ → <se server> (SE<model>)] → <unit> (MU) → Service, Update tab
To Next Page
Loading...
