Managing units of the SE server Managing hardware
236 U41855-J-Z125-3-76
10.1.5.8 Generating diagnostic data
To support error diagnosis by Customer Support, the administrator or operator can
generate diagnostic data when an error situation occurs and send this to the Support
Center.
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (HNC) → Service,
Diagnostics tab.
The functionality of the tab is the same as that for the MU (see section “Generating
diagnostic data” on page 222).
The file name of the diagnostic data file for the HNC is:
DIAGtar.H<software-version><unit-name>.<date>.<time>.gz
To Next Page
Loading...
